How to maintain Industrail Lens ?

How to maintain Industrail Lens ?

industrial lens is a very important part in our photography. It can be cheap or expensive. When you use the cheap industrial lens, you might throw it away casually. On the other hand, the expensive industrial lens is carefully protected, so as not to be damaged or broken. Some of our friends in the process of using industrial lens, due to improper maintenance, often broke the industrial lens, fell into the water, industrial lens mold and other problems appear, once such problems occur, maintenance is also quite troublesome. Nowadays, industrial lens is a very precise component, which generally requires professional technicians to handle. The maintenance cost is also very high, ranging from hundreds to thousands of yuan. Then how do we usually maintain the industrial lens?

1. Pay attention to moisture prevention

The weather in southern China is rainy and humid all year round, so industrial lens can be used in a humid environment. If the moisture is not removed in time, the industrial lens is prone to mold. industrial lens mildew is more common in southern China. However, due to dry weather in northern China, it is less likely that industrial lens mildew will occur. However, we should pay attention to prevent dust from entering the industrial lens and photographic elements of the camera.
Don't put the industrial lens in the moisture-proof box immediately after using it in a humid environment or if it is flooded with water. Put the industrial lens in a well-ventilated environment and dry it thoroughly before putting it in a moisture-proof box for better effect. The LIKELIHOOD CAN have a friend TO say, does not have moisture-proof box want how ability moisture-proof? Xiaobian tells you a very simple and only spend more than ten dollars can be done moisture-proof way, that is, the use of sealant bag and some bamboo charcoal bag can achieve moisture-proof purpose, generally can be bought in the supermarket, very convenient, the effect is also good. If at the end of the article
After drying the industrial lens, put it in a bamboo charcoal bag, squeeze out the air, and then press the seal tightly to prevent the outside air from entering the bag. Also CAN RISE SO MOISTurePROOF EFFECT, ALTHOUGH MORE troublesome, BUT ECONOMY IS PRACTICAL. Another effect is that when we go outside to shoot, we can also put the industrial lens into a sealed bag to prevent water from falling into the water, or prevent water from falling into the industrial lens on rainy days, and it can also prevent dust. Small bags really play a big role. You can try if you don't want to.

2. Pay attention to fall prevention

When we shoot outside, we often change the industrial lens. When the industrial lens is held unstable, it is easy to fall to the ground and break. Is there anything we can do to prevent it? Generally, the head is equipped with a light shield. When we replace the industrial lens, we should not remove the light shield first. Instead, we should remove the entire industrial lens and put it in the bag before removing the light shield. The advantage of this is that when the industrial lens falls to the ground, the visor hits the ground first, which can buffer the gravity impact on the industrial lens, and the probability of the industrial lens falling is greatly reduced. It's a good idea to add a UV lens as well. In this way, the lenses of industrial lenses are less likely to break, and the UV lens can also protect the lens from damage. A UV lens doesn't cost much either, and one is recommended for each industrial lens.